Capillary electrophoretic studies on quantum dots and histidine appended peptides self‐assembly

Herein, we designed four peptides appended with different numbers of histidine (His_n‐peptide). We launched a systematic investigation on quantum dots (QDs) and His_n‐peptide self‐assembly in solution using fluorescence coupled CE (CE‐FL). The results indicated that CE‐FL was a powerful method to probe how ligands interaction on the surface of nanoparticles. The self‐assembly of QDs and peptide was determined by the numbers of histidine. We also observed that longer polyhistidine tags (n ≤ 6) could improve the self‐assembly efficiency. Furthermore, the formation and separation of QD‐peptide assembly were also studied by CE‐FL inside a capillary. The total time for the mixing, self‐assembly, separation, and detection was less than 10 min. Our method greatly expands the application of CE‐FL in QDs‐based biolabeling and bioanalysis.     

介质阻挡放电甲醇脱氢偶联一步合成乙二醇反应中氢气的催化作用

利用原位发射光谱表征和在线色谱分析,研究了甲醇介质阻挡放电脱氢偶联一步合成乙二醇反应中氢气的催化作用,考察了放电频率、甲醇和氢气进料量以及反应压力的影响.结果表明,在介质阻挡放电产生的非平衡等离子体中,H2不但能显著提高甲醇转化率,而且能显著提高乙二醇的选择性.在300°C,0.1 MPa,反应器注入功率为11 W,放电频率为12.0 k Hz,甲醇气体进料量为11.1 m L/min,氢气进料量为80–180 m L/min的条件下,甲醇转化率接近30%,乙二醇选择性大于75%.乙二醇收率与激发态氢原子的Hα谱线强度之间存在同增同减关系.由此推测,氢原子是起催化作用的活性氢物种.活性氢物种的生成途径是:基态氢分子通过与电子碰撞变成激发态,激发态氢分子通过第一激发态氢自动解离为基态氢原子.放电反应条件通过影响氢分子解离来影响氢气的催化作用.氢气在非平衡等离子体中显示的催化作用有可能为开辟新的化学合成途径提供重要机遇.     

聚苯胺盐在无溶剂条件下有效催化羰基保护反应

合成了自掺杂聚苯胺盐PABSA,并成功应用于醛和乙酸酐的缩醛化反应,发现此聚苯胺盐催化剂具有高效、可回收等特性。同时,利用二元醇作为保护基团,醛也可以转化成相应的缩醛。考察了反应时间、温度和催化剂用量对反应的影响,并通过IR、1H NMR、13C NMR和元素分析对部分产物进行了结构表征。     

The Two‐Step Assemblies of Basic‐Amino‐Acid‐Rich Peptide with a Highly Charged Polyoxometalate

Two‐step assembly of a peptide from HPV16 L1 with a highly charged europium‐substituted polyoxometalate (POM) cluster, accompanying a great luminescence enhancement of the inorganic polyanions, is reported. The mechanism is discussed in detail by analyzing the thermodynamic parameters from isothermal titration calorimetry (ITC), time‐resolved fluorescent and NMR spectra. By comparing the actions of the peptide analogues, a binding process and model are proposed accordingly. The driving forces in each binding step are clarified, and the initial POM aggregation, basic‐sequence and hydrophobic C termini of peptide are revealed to contribute essentially to the two‐step assembly. The present study demonstrates both a meaningful preparation for bioinorganic materials and a strategy using POMs to modulate the assembly of peptides and even proteins, which could be extended to other proteins and/or viruses by using peptides and POMs with similar properties.     

高效液相色谱-串联质谱法测定农产品中矮壮素残留量

提出了农产品中矮壮素的高效液相色谱-串联质谱(HPLC-MS/MS)分析方法。样品经甲醇-水(1+1)溶液提取,正己烷液液萃取后,采用阳离子交换固相萃取柱净化。所得净化液以阳离子交换树脂与C18混合填料色谱柱为固定相,以含0.1%(体积分数)乙酸的乙腈-10mmol·L-1乙酸铵(1+1)溶液为流动相进行等度洗脱,采用电喷雾正离子源,多反应监测模式检测,同位素内标法定量。矮壮素的线性范围为1.0~100μg·L-1,检出限(3S/N)为5μg·kg-1,测定下限(10S/N)为10μg·kg-1。矮壮素在10,100,500μg·kg-1等3个加标水平的回收率为90.5%~98.5%之间,测定值的相对标准偏差(n=6)在0.99%~2.2%之间。     

Solvent‐dependent structural dynamics of 2(1H)‐pyridinone in light absorbing S4(ππ*) state

The B‐band resonance Raman spectra of 2(1H)‐pyridinone (NHP) in water and acetonitrile were obtained, and their intensity patterns were found to be significantly different. To explore the underlying excited state tautomeric reaction mechanisms of NHP in water and acetonitrile, the vibrational analysis was carried out for NHP, 2(1D)‐pyridinone (NDP), NHP–(H₂O)_n (n = 1, 2) clusters, and NDP–(D₂O)_n (n = 1, 2) clusters on the basis of the FT‐Raman experiments, the B3LYP/6‐311++G(d,p) computations using PCM solvent model, and the normal mode analysis. Good agreements between experimental and theoretically predicted frequencies and intensities in different surrounding environments enabled reliable assignments of Raman bands in both the FT‐Raman and the resonance Raman spectra. The results indicated that most of the B‐band resonance Raman spectra in H₂O was assignable to the fundamental, overtones, and combination bands of about ten vibration modes of ring‐type NHP–(H₂O)₂ cluster, while most of the B‐band resonance Raman spectra in CH₃CN was assigned to the fundamental, overtones, and combination bands of about eight vibration modes of linear‐type NHP–CH₃CN. The solvent effect of the excited state enol‐keto tautomeric reaction mechanisms was explored on the basis of the significant difference in the short‐time structural dynamics of NHP in H₂O and CH₃CN. The inter‐molecular and intra‐molecular ESPT reaction mechanisms were proposed respectively to explain the Franck–Condon region structural dynamics of NHP in H₂O and CH₃CN.Copyright © 2015 John Wiley & Sons, Ltd.     

四轮驱动全向底盘的控制方法研究

为提高机器人移动的灵活性和机动性,使机器人到任意位置均沿直线行走并改变姿态,需在传统的两轮驱动底盘上增加驱动轮,本文主要针对四轮驱动全向底盘的控制方法进行研究。本文对四轮驱动全向底盘进行运动学分析并建模,得到了控制系统传递函数,并进仿真验证;对四轮驱动全向底盘进行了动力学建模,分析了如何避免出现“打滑”现象;导航方式采用了经济、精度较高的全向码盘导航方式;控制上采用闭环控制,加入前置探测点和超前校正环节,并且考虑了实际过程中机体的加减速问题。实验结果表明,提出的控制方法可以使四轮驱动全向底盘实现预设功能,并且具有较高的控制精度,研究内容对机器人的灵活移动有着十分重要的意义。     

拓扑绝缘体(Bi0.5Sb0.5)2Te3薄膜中的线性磁阻

本文报道了拓扑绝缘体(Bi_0.5Sb_0.5)₂Te₃薄膜中线性磁阻问题的系统性研究工作. 此体系中, 线性磁阻在很宽的温度和磁场范围内出现: 磁场高达18 T时磁阻仍没有饱和趋势, 并且当温度不高于50 K时, 线性磁阻的大小对温度的变化不敏感. 栅压调控化学势可明显改变线性磁阻的大小. 当化学势接近狄拉克点时, 线性磁阻最为显著. 这些结果说明电荷分布的不均匀性是引起该材料线性磁阻的根源.     

Xe54+离子与Xe原子碰撞过程中的辐射电子俘获及退激发辐射的理论研究

基于多组态Dirac-Fock理论方法和冲量近似, 对Xe⁵⁴⁺与Xe在197 MeV/u碰撞能量下, 炮弹离子的俘获及退激发过程进行了理论研究. 计算了炮弹离子从中性靶原子俘获一个电子到nl (n=1, 2, 3, 4, 5; l=s, p, d) 轨道上的辐射电子俘获截面和相应的辐射光子能量, 以及俘获末态退激发辐射跃迁的能量和概率. 结合这些计算结果, 进一步模拟了碰撞产生的炮弹离子的退激发X射线谱的结构, 并与兰州重离子加速器装置上的最新实验观测结果进行了比较, 符合得很好.     

ITER ���򳡴���֧��U �����Լк��ӷ����Ż�

利用试验及数值模拟技术研究了ITER 极向场磁体支撑U 型韧性夹的焊接变形规律,模拟和实际测量的比较验证了模拟的准确性,从而得到了U 型夹焊缝变形的基本规律,并改进现有夹具类型。基于验证好的热力边界条件以及优化的夹具,对三种焊接方案的U 型韧性夹的焊接变形进行了计算,从而提出了极向场磁体支撑制造的优化方案。优化后的焊接方案将焊接变形控制在0.6mm 以内。